WATER DUST COLLECTOR

AIR BOX
water dust suction cabin

Dust collector with water technology, thanks to its versatility, is used for many processes with dry and water tools. Its simplified but sturdy construction and the low maintenance required makes this dust collector the most common for companies in stone industries and more. The Air Box utilizes high quality materials such as: Stainless steel AISI 304 for machine body and pump and brass for the nebulization nozzles.

The large front suction mouth, permit an efficient and homogenous aspiration on all machine front surface. The Air Box is suitable for any type of work, be it on a workbench, workstand, or for statues. Suitable for dust of stone, concrete, glass, wood, metals.

The pump placed inside the water recycling tank feeds the high-performance nozzles mounted on two different stage pipes that create a twin barrier of finely atomized water. The aspirator attracts the dusty air and makes it pass through the atomized water. The powders, once in contact with water, turn into mud. Periodically, the sludge deposited in the tank must be removed and the exhausted water replaced.

AIR BOX water DUST COLLECTOR

LEARN HOW IT WORKS

WATER DUST COLLECTION

ADVANTAGES

Machine fully made in Stainless Steel
Powerful aspiration (thanks to its two motor-fans)
Suitable for Dry and Water tools cut
Water filter honeycomb grid (removable from the front)
Spray nozzles made in brass (patented self-purging and inspectable system)
Quick & Easy maintenance operations

Catalog

Discover our solutions for Water Filtration and Dust Control

Download

Air Box

Nebulization nozzles

FAQ

Cabin or bench, which water dust collector system is better?

The suction workbench is particularly suitable for all construction works because the removal of dust is almost immediate, while the cabin is more suitable for works of various kinds such as sculptors, large kitchens, or for those used to working with mobile benches or on a frame. For those with limited space, the Cabin takes up less space than the counter.

Why are there still water models?

For certain works and materials, water atomization systems are more suitable. It is a cheaper system and has good suction power performance.

Does the water dust collector purify more than the dry system?

The dry system approaches 100% constant, while the water system ≤ 85 % in relation to the load of dust and the quality/purity of the water in the given instant. You can apply additional filters on top to optimize the fight.

What are the advantages of water-jet purification technology ?

For some types of material and processing, water is better. For example for painters and carpenters.

When should I change the filters?

Water systems do not use filters because the filter element is water.

Does a water dust collector system get clogged easily?

No, the water vapor retainers must be rinsed every 4-6 months.

Where is released the air discharge?

From the roof of the machine by means of motorized fans.

Can I discharge the air inside the workshop?

Certainly, the machine was designed for that purpose. In some regions this may be called into question due to the regulations in that area. It is advisable to inquire before purchasing if it is not possible to discharge the air outside the laboratory as alternative.

If I duct the air outside, I spend more on heating bills?

The air, picking up speed, loses its heat. Therefore, once returned to the workplace, it will still play against it. By discharging the air outside, a better air exchange is created, especially in humid environments.

How do I dispose the sludge?

A drainage channel/trench should preferably be provided in the immediate vicinity of the machine as the water must be replaced weekly.

How far does a water dust collector aspire?

Closer you are, better it works. The supplied plastic extensions are needed to better concentrate the suction power by reducing the dissipation of dust in the work environment and to extend its attraction. You can add more extension modules, including telescopic ones, up to a maximum of 3 meters depth. The machine with the standard extension (one meter deep)is able to attract dust with a decent capacity up to two meters from the front of the machine.

What dynamics of dust extraction does it have?

The powders are attracted homogeneously over the entire face of the machine by dragging them towards the ground to reduce direct inhalation from the operator. See the demo videos.

How do you clean it?

The exhausted water must be drained, and any muddy residues removed by rinsing them away with the aid of a water hose.

Can it work in an explosive environment?

Yes, but some security changes will need to be made. Extra cost apart.

What materials can I suck up?

Stones and derivatives, cement, glass, plastics and derivatives, wood, metals, sandblasting powders.

Can the water dust system vacuum in the presence of water vapors from water tools?

Yes, it has no problem. Even water hand tools emit some inhalable dust, even minimal but there is the risk.

Download Documentation

Request

Related Products

MAGNUM

Dust suction arm

Contact Us!

Need More Information? We are here to help you.

Get in touch

ITALMECC S.r.l.

Z.I.1, Via Umbria 15
36015 Schio VI (Italy)

+39 0445 575187
+39 0445 575651
Questo indirizzo email è protetto dagli spambots. È necessario abilitare JavaScript per vederlo.

ITALMECC
North America

+1 810.671.5251
Questo indirizzo email è protetto dagli spambots. È necessario abilitare JavaScript per vederlo.